Click image to view full size image
Product introduction of shelf racking
Shelf racking are usually manual access method, assembly structure, the average spacing between the adjustable, the goods are often set or not very heavy unpacked items (ie, manual access), the shelf height is usually 2.5m The following, otherwise the manual is difficult to involve (such as supplemented by a high car can be set at 3m or so). Unit shelf span (length) should not be too long, the unit shelf depth (width) should not be too deep, according to its unit shelf load per layer can be divided into light, medium and heavy shelf racking.
Product specification of the shelf rack
Racking specs（LXW: mm） |
Shelf layers（pcs） |
2000X600X2400 |
6 |
2000X600X2000 |
5 |
1800X600X2400 |
6 |
1800X600X2000 |
5 |
2000X500X2000 |
5 |
1800X500X2000 |
5 |
Product feature and application of shelf racking
Can be combined with light, medium or heavy duty storage racking for the storage of a wide variety of non-palletised goods to allow for picking items lower down and bulk storage above.
※ 100% Selectivity of a location for each product.
※ Vertical space is used for increased product storage.
※ May be engineered to meet any load or configuration requirement.
※ Can also be used with steel or timber decks to store non-palletised loads or for picking.
Application :
Food, beverage, chemical, tobacco and other single species, large quantities and relatively single item product.
Production details of the shelf rack
Upright structure
Beam structure
No. |
Name |
No. |
Name |
No. |
Name |
1 |
Upright |
4 |
Beam |
7 |
shim |
2 |
Horizontal bracing |
5 |
Shelf |
8 |
Horizontal bar |
3 |
Diagonal bracing |
6 |
Block shelf |
9 |
Side panel |
Production procedure of the shelf racking
Deliver,shipping and serving of shelf rack
E-mail: 